Mazda RX 4, Luce Rotary: Different Names, Same Vehicle 19
May
Posted by admin in Cars on 05 19th, 2010

In Japan, the Mazda RX 4 was known as the Luce Rotary. Despite different names, though, the Mazda RX 4 and the Luce Rotary was still the very same vehicle from the Mazda Motor Corporation which has its headquarters mainly located in Hiroshima, Japan.

The Mazda RX 4 has had other contemporaries, equals, and peers that also are under the Mazda brands line up of vehicles. Each of its peers are rotary powered. Contemporaries for the Mazda RX 4 include the Mazda RX 2 and the Mazda RX 3. The former was based actually on the Mazda Capella, as with the latter, it was actually based on the Mazda Familia.

Comparing the Mazda RX 4 with the two vehicles, the Mazda RX4 2 and the Mazda RX 3, the Mazda RX 4 is still larger than both. Despite that, the Luce/929 chassis that the latter holds is the very same one that both of the other two vehicles use. The Luce/929 chassis actually replaced the R130. This replacement was done in October of 1972. Originally, the Mazda RX 4 was made available as a hardtop coupe and also as a sedan. Come the year 1972, this vehicle make was then made available as a station wagon. The station wagon was introduced so as to replace the Savanna Wagon.

When it was first introduced, the Mazda RX 4 held a 120 horsepower 12A engine. However, later on in 1974, this was replaced by the larger 13B engine. This was made for export purposes. This new engine gave the Mazda RX 4 the chance to be environment friendly for it was what Mazda called the AP version. AP stood for anti pollution. The vehicle also used a strut type independent suspension in the front part as with a solid axle in the rear. The brake discs were mounted in the front and the drum brakes were installed in the rear. The vehicle held a curb weight that could get as low as 2620 pounds.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts



Mazda Pickups Playing It Up In the US Market 18
May
Posted by admin in Cars on 05 18th, 2010

Headquartered and based in Hiroshima, Japan, the Mazda Motor Corporation, or more commonly known as Mazda, is one of the leading manufacturers and producers of vehicles. It was able to enter the United States market for automobiles in the year 1970.

By entering the US market, an automobile company should have a number of vehicles in tow so as to introduce to the public. What Mazda brought was one single car which was the Mazda RX 2. However, come the following year, 1971, Mazda now had five cars tagging along with it. These five cars were comprised of the compact cars that were based on the Mazda Familia the Mazda 1200 and the Mazda R100, the larger vehicles based this time on the Mazda Capella the Mazda 616 and the Mazda RX 2, and lastly, the larger Mazda 1800. And after that, the Mazda vehicle line for the US auto market welcomed in the Mazda RX 3 and the Mazda B1600. Also joining the family were the Mazda 808 as well as the Mazda 618.

Quickly rising in popularity and prominence, continued to work on their vehicle line up so as to create or spruce up new innovations as well as craft wonderful designs. Their prominence was mainly due to their utilization of Wankel engines. This engine is actually a type of internal combustion engine that has been invented by Felix Wankel who was a German innovator and inventor. Instead of using pistons, the Wankel engine used a rotor.

One of the major players in the Mazda line up for the American market is the Mazda Pickup. The Mazda Pickup has a wonderful combination of a variety of features. Putting style, sophistication, elegance, agility, strength, and power in just one vehicle makes it a unique. In fact, many people who have been able to use this vehicle has stated that it is a perfect vehicle to use and to drive. It holds a muscular and rugged look that also achieves a sporty style as well. It suggests top performance as well as versatility.

The Mazda Pickup has a body that is mounted confidently on large and very stylish wheels. This kind of wheelbase gives the Mazda Pickup a stable stance as well as a tough look. One of the vehicle line under the Mazda Pickup umbrella is the B Series. This series holds sleek lines as well as rounded corners. It also boasts of sculpted contours and curves as per its front fenders and rear fenders. Giving it a unique front design is the Mazdas 5-point grille.

One of the leading Mazda parts suppliers is Mazda Parts and Mazda Auto Parts. This online store offers high quality and very durable Mazda auto parts that are guaranteed to hold the lowest prices available. Customers and Mazda owners could simply access Mazda Parts and Mazda Auto Parts site so as to view one of the largest collections of Mazda Pickup parts. At present, this online store is one of the largest Mazda auto parts wholesalers in the United States. It offers a variety of Mazda parts such as body parts, brakes, steering and a lot more. It has a very friendly and efficient customer service staff waiting for inquiries.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts



Mazda 626, Mazdas Family Car 14
May
Posted by admin in Cars on 05 14th, 2010

After the Mazda 616 and the Mazda 618 and also before the Mazda Mazda6 came the Mazda 626. The former mentioned vehicles, the Mazda 616 and the Mazda 618, were the predecessors of the Mazda 626. Of course, this vehicle is the product of the Mazda Motor Companys hard work and efforts. They have been able to build the Mazda 626 as a compact and midsize car. Its competition in the automobile market includes the Toyota Camry, the Honda Accord, the Nissan Stanza, and the Hyundai Sonata.

The Mazda Motor Corporation targeted the Mazda 626 to be designed and marketed as a car that could be utilized by families. Also, they made the vehicle as a commodity that could be exported to other areas and regions. It was actually based on the Mazda Capella which was a vehicle that the company only sold in Japan. In 1979, the Mazda 626 replaced the spot that was the Mazda 616s, Mazda 618s, and the Mazda RX 2s. Up until 2002, the Mazda 626 was in production. However, soon enough, the Mazda Mazda6 took over the family car market and the Mazda 626s production was completely halted.

If you travel to other parts of the globe, you would see that the Mazda 626 was sold under various names. In Asia, in Australasia, and in Southern Africa, this family car was known and marketed as the Ford Telstar. However, it only lived for a short while since the Ford Mondeo, which was sourced from Europe, came into these markets and took over the Ford Telstar.

This vehicle is actually known one of the very first Japanese brand cars that were built in the United States. However, it was certified as a domestic car by the United States government after ten long years. In last years of the Mazda 626, it was built and restyled to have exterior upgrades and interior upgrades. These upgrades gave the Mazda 626 a sportier look and it also provided the vehicle a better performance and handling.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts



Before the Mazda 6 25
Dec
Posted by admin in Cars on 12 25th, 2009

For the market outside of its domain in Japan, Mazda produced the Mazda 626 family car. It was based on the Mazda Capella which was mainly sold in Japan. This new vehicle replaced the 616/618 and the RX-2 in 1979 and this was sold up until 2002. What took up the place of the Mazda 626 was the Mazda 6. In Asia, Australasia, and in Southern Africa, the Mazda 626 was sold under the name Ford Telstar.

This vehicle made its first public appearance in 1979 as a rear wheel drive compact. It had a 75 hp 2.0 liter SOHC straight-4 G/MA engine that had automobile magazines comparing it to a BMW engine. The vehicle sported a split-folding rear seat that increased cargo capacity and flexibility to the maximum level. This vehicle has been a top seller since its production.

In the year 1998, the Mazda 626 had gone through a dramatic change in its entirety. All models had either a five-speed manual transmission or the optional four-speed automatic. It had a wheelbase that was enlarged to two inches and the sedan type had 2.4 inches longer, and around a half inch wider. Along with that came the V6 engine that took traction control and engine mobilization to another level. From that time on, changes had been constantly done to the Mazda 626 to further improve its performance and user appeal.

In 1999, the Mazda 626 experienced a shuffling of its equipments. Mazda dropped the base DX sedan and in its place added up a four-cylinder version of the top-line ES that came with trimmed leather. For all trim levels of the Mazda 626, keyless entry became a standard, along with variable-intermittent wipers, and a power antenna. The following year, this vehicle had an option list. The list included front side airbags, and ABS. Its four-cylinder engine gained five horsepower more. All trim levels held rear-seat heater ducts, and some of these levels had heated mirrors although others had this as an option. The final year for the Mazda 626 came in 2002 before it was entirely replaced by the new Mazda 6.

Overall, the Mazda 626 held a quiet and refined stance. Its engine and wind noise were muffled well. It has a firm and absorbent ride quality. It holds a precise steering and good braking. It has large doorways that allows for an easy entrance or exit. It is a competitive vehicle when talking in terms of its visibility, driving, seating, and its dashboard layout. Its interior exudes a tasteful and understated look. It has roomy compartments within its dashboard and console and its map pockets.

With years of combined experience in selling premium quality Mazda parts, Mazda Parts and Mazda Auto Parts has been the trusted and most reliable source of superb quality Mazda 626 parts and other Mazda parts.

In a nutshell, the Mazda 626 quite suffers from road noise and a low performance of its automatic transmission. However, this is quickly dispersed by its V6 engines perfect acceleration, quality steering and handling, and a superb build quality that only the Mazda 626 has to offer.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts



2006 Mazda6 Does The Zoom-Zoom 22
Nov
Posted by admin in Cars on 11 22nd, 2009

Sedan, hatchback or station wagon, you can own a 2006 Mazda6 for these are the body styles that are offered for this vehicle model. This vehicle offers a splendid performance hidden behind its spicy and hot style and design. Comfort is also something that this vehicle offers for its cabin and its seats can be arranged. A great amount of cargo could also be transported using the 2006 Mazda6 with its fifty eight cubic feet of space in the back as you fold down the rear seats.

Manufactured by the automaker, Mazda, the Mazda6 has actually been existing as a production vehicle since 2003 and up until the present, it continually proves that it will stay and it will prevail despite changing lifestyles and changing needs of the market. It took the spot that was previously occupied by the Mazda 626 and the Mazd Capella in the Mazda line up of vehicles. This midsize vehicle has been made available as a sedan with four doors, a station wagon with four, and a hatchback that holds five doors.

There are five engine choices for the Mazda6. The list includes a 1.8 liter MZR I4 engine, a 2.0 liter MZR I4, a 2.3 liter MZR I4, a 3.0 liter Duratec V6, and a 2.0 liter MZR-CD diesel engine. Considered as its competition are the Chevrolet Malibu, Honda Accord, Hyundai Sonata, Peugeot 407, Nissan Primera, Volkswagen Passat, and the Toyota Avensis. Ranging from $23,415 to $27,315, you can own one of these vehicles yourself. It has a mileage of 19 miles per gallon on streets and city roads, and 26 miles per gallon for highways.

Generosity is a trait that the 2006 Mazda6 has. You can find features like air conditioning, power windows, a cruise control system, radio controls that are mounted on its steering wheel, full power mirrors, a tilt and telescoping steering wheel, as well as power door locks.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts